Full Judgment Text
http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 1 of 5
CASE NO.:
Appeal (civil) 2411 of 2002
PETITIONER:
M/s. Lohia Sheet Products
RESPONDENT:
Commissioner of Customs, New Delhi
DATE OF JUDGMENT: 05/03/2008
BENCH:
ASHOK BHAN & J.M. PANCHAL
JUDGMENT:
J U D G M E N T
CIVIL APPEAL NO.2411 OF 2002
W I T H
CIVIL APPEAL NO.2416 OF 2002
M/s. Lohia Brass (P) Ltd. .....Appellant
Versus
Commissioner of Customs, New Delhi .....Respondent
ASHOK BHAN, J.
1. The appellants have filed these appeals under Section 130-E of the Customs Act, 1962
against the Final Order No.547-548 of 2001-B dated 11th December 2001 passed by the
Customs, Excise & Gold (Control) Appellate Tribunal [for short, ’the Tribunal’], New
Delhi whereby the Tribunal has rejected the appeals filed by the appellants and held that
the appellants had not satisfied the conditions for availing the benefit of the Notification
No.8/96-CE dated 23rd July 1996 on the ground that the copper waste and scrap used by
the appellants had been imported and had not been generated in the factory of
production.
C.A.No.2411/02 .... (contd.)
- 2 -
2. The issue involved in these appeals is as to whether the scrap imported by the
appellants is chargeable to ’NIL’ rate of additional customs duty under Section 3 of the
Customs Tariff Act 1975.
3. The facts of the case, in brief, are enumerated hereinbelow.
4. In the year 1996-97, the appellants imported copper/brass waste and scrap for use in
the manufacture of handicrafts and filed bills of entry and claimed benefit under
Exemption Notification No.8/96-CE dated 23rd July 1996. In order to avoid unnecessary
delay and demurrage, the appellants paid the duty under protest and filed refund claim
before the Asst. Commissioner, ICD, Tughlakabad.
5. Department questioned the refund claim of the appellants by issuing notice dated 10t
h
September 1998 to show cause as to why their refund claim be not rejected as the Tariff
Heading 7404.10 would be applicable to the waste which was generated during the
process of production only in the factory and then used in the same factory of production
for the manufacture of unrefined or unwrought copper, copper sheets or circles and
handicrafts and hence, the imported goods fall outside the purview of exemption under
Central Excise Tariff Heading 7404.10. Despite the opportunity of personal hearing
having been given to the appellants, no one appeared before the Asstt.
C.A.No.2411/02 .... (contd.)
http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 2 of 5
- 3 -
Commissioner (Refund) who, having gone through the record and the facts of the case
rejected the claim of the appellants by an order dated 15th October 1998 by observing
thus :
".....The tariff heading 7404.10 exempts waste and scraps which is generated
during the process of production in the factory and then used in the same
factory of production for the manufacture of unrefined or unwrought copper,
copper sheets or circles and handicraft. Therefore, there is no substance and
legal force in the claimant’s contention that the brass/copper scrap imported by
them is covered under Chapter Heading 7404.10 and is exempted from
payment of CVD. Hence, the duty has been charged and paid correctly in the
case under reference and there is no question of incidence of any refund. The
refund claim therefore merits rejection."
6. This finding arrived at in the order in original was confirmed by the Commissioner o
f
Customs (Appeals) by an order dated 13th June 2001. Being aggrieved, the appellants
filed appeal before the Tribunal which has been dismissed by the impugned order,
holding that the condition of the notification of the Tariff Heading 7404.10 had not been
satisfied by the appellants as the copper waste and scrap had been imported by the
appellants from foreign country and the same had not been generated in the factory of the
appellants. Hence, this appeal.
7. Relevant portion of Section 3 of the Customs Tariff Act 1975 provides as under :
"3. Levy of additional duty equal to excise duty.-(1) Any article which is
imported into India shall, in addition,
C.A.No.2411/02 .... (contd.)
- 4 -
be liable to a duty (hereafter in this section referred to as the additional duty)
equal to the excise duty for the time being leviable on a like article if produced
or manufactured in India and if such excise duty on a like article is leviable at
any percentage of its value, the additional duty to which the imported article
shall be so liable shall be calculated at that percentage of the value of the
imported article.
Provided ... ... ...
Explanation.- In this section, the expression "the excise duty for the time
being leviable on a like article if produced or manufactured in India" means the
excise duty for the time being in force which would be leviable on a like article
if produced or manufactured in India, or, if a like article is not so produced or
manufactured, which would be leviable on the class or description of articles to
which the imported article belongs, and where such duty is leviable at different
rates, the highest duty."
8. In exercise of the powers conferred by sub-section (1) of Section 5A of the Central
Excise Act 1944, the Central Government, in public interest, exempted goods specified in
column (3) of the Table annexed to the notification and falling within the Chapter,
Heading No. or sub-heading No. of the Schedule to the Central Excise Tariff Act, 1985,
specified in the corresponding entry in column (2) of the said Table, from so much of the
duty of excise leviable thereon which is specified in the said Schedule, as is in excess of
the
amount calculated at the rate specified in the corresponding entry in column (4) of the
said Table, subject to the conditions, if any, laid down in the corresponding entry in
column (5) thereof or as mentioned in the said column (5) and specified below the said
Table. Entry 74.04 in the said Table reads thus :
C.A.No.2411/02 .... (contd.)
- 5 -
"Refe- Chapter Description of goods Rate
rence Heading
http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 3 of 5
No. No. or
Sub-
heading
No.
(1) (2) (3) (4)
74.04 Copper waste and scrap used Nil
within the factory of production
for the manufacture of unrefined
or unwrought copper, copper sheets
or circles and handicrafts."
9. Authorities below and the Tribunal have denied the relief to the appellants holding
that the exemption notification is not applicable to the appellants.
10. Counsel for the appellants has contended that mere fact that the goods were imported
would not make any difference; that the intention of the Legislature was to grant
exemption under the notification so as to prevent duty being paid at two stages. In the
present case, as the appellants have paid an amount equivalent to the excise duty at the
time of import of the waste and scrap, they could not be asked to pay the countervailing
duty; that if the benefit of the notification is not given to the appellants, it would mean
double payment of duty which goes contrary to the law laid down by a Constitution
Bench decision of this Court in the case of Hyderabad Industries Ltd. v. Union of India
1999(108) ELT 321 (SC). According to the counsel for the appellants the Tribunal
committed an error in restricting
C.A.No.2411/02 .... (contd.)
- 6 -
the scope of the impugned notification to the copper/brass waste generated in the factory
of production for the manufacture of unrefined or unwrought copper, copper sheets or
circles and handicrafts and thereby rejecting the appellants’ claim for refund simply
because they had imported the said waste/scrap and then used it within the factory of
production for the manufacture of final product.
11. As against this, counsel for the respondent contended that the phrase, ’within the
factory of production’ pre-supposes that only that waste and scrap is exempted from
payment of duty which is generated and then used within the factory of production and
since in the present case the waste and/or scrap had been imported from abroad, it cannot
be said that it is being used in the factory of production.
12. Counsel for the parties have been heard.
13. Admitted facts are that the appellants had imported copper/brass waste and/or scrap.
They had used the imported waste and scrap in the manufacture of handicrafts; had paid
duty on the imported copper waste and scrap. The only dispute is whether they are
required to pay countervailing duty under Section 3(1) of the Customs Tariff Act.
14. The explanation to the sub-section (1) of Section 3 clarifies the expression, "the e
xcise
duty for the time being leviable on a like article if produced or manufactured in India"
C.A.No.2411/02 .... (contd.)
- 7 -
used in the said Section that excise duty which would be leviable on a like article if
produced or manufactured in India. It further clarifies that if a like article is not so
produced or manufactured which in turn clarifies that for the purpose of levy of
additional duty actual production or manufacture of like article is not necessary.
15. Entry 74.04 can be divided into three parts, viz., (i) copper waste and scrap; (ii)
used
within the factory of production; and (iii) for the manufacture of unrefined or unwrought
copper, copper sheets or circles and handicrafts. The sum and substance of the entry, in
our opinion, is that if a manufacturer uses copper waste and scrap within the factory of
production for the manufacture of unrefined or unwrought copper, copper sheets or
circles and handicrafts, then it would be entitled to the exemption under the impugned
notification. In the present case, the appellants satisfy all the three conditions as they
http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 4 of 5
had
used the copper/brass waste and/or scrap within the factory of production, and for the
manufacture of handicrafts. The entry nowhere uses the word ’generated’ or ’imported’.
The condition that only that scrap would be entitled to exemption which has been
generated in the factory of production is, therefore, unwarranted and unsustainable. The
word, ’within’ occurs after the word, ’used’. The assessing authority as well as the
Tribunal have arrived at the finding
C.A.No.2411/02 .... (contd.)
- 8 -
that only that scrap/waste of copper would be entitled to the exemption which had been
generated in the same factory because of the word, ’within’ used in the heading 74.04.
According to them, the word, ’within’ pre-supposes that the copper waste and scrap was
generated in the same factory. We are unable to read the entry in the manner as
suggested by the Revenue.
16. The test laid down by the Tribunal that the benefit of the notification/tariff headi
ng
would be admissible to only that copper waste and scrap which is generated in the factory
of production and not the imported waste and scrap, is not supported either by the text of
the exemption notification, heading 74.04 or any other authority.
17. This Court in the case of Thermax Pvt. Ltd. v. Commissioner of Customs 1992 (61)
ELT 352 (SC) has held that since the concession under Rule 192 turns only on the nature
and use to which the goods are put by the user or purchaser thereof and whether he has
gone through the procedure outlined in Chapter X, it would not be correct to deny it to a
supplier of such goods on the ground that he was an importer and not a manufacturer.
In other words, this Court stated in specific terms that one has to forget that the goods
are imported, imagine that the importer had manufactured the goods in India, determine
the amount of excise duty that he would have been called upon to pay in that event. The
decision of the Tribunal
C.A.No.2411/02 .... (contd.)
- 9 -
that the assessee could not get a refund because the procedure of Chapter X of the Rules
is inapplicable to importers as such was held to be wrong. It was further held that the
benefit of the exemption or concession should be granted wherever the intended use of the
material can be established by the importer or by other evidence. In the present case, it i
s
a matter of fact that duty was paid by the appellant at the time of import of waste or
scrap. Mere fact that the goods were imported would not make any difference. The
intention behind the grant of exemption under the notification was to prevent the duty
being paid at two stages. In the present case, an amount equivalent to the excise duty had
been paid by the appellants at the time of import on the waste and scrap. If the benefit of
the notification is not given to the appellants it would mean double payment of duty
which goes contrary to the law laid down by the decision of the Constitution Bench of this
Court in the case of Hyderabad Industries Ltd. (supra). This Court in the said judgment
held as under :
"10. Section 3(1) of the Customs Tariff Act, 1975 provides for levy of an
additional duty. The duty is, in other words, in addition to the customs duty
leviable under Section 12 of the Customs Act read with Section 2 of the Customs
Tariff Act. Secondly this duty is leviable at a rate equal to the excise duty for
the time being leviable on a like article to the one which is imported if produced
or manufactured in India. The explanation to this sub-section expands the
meaning of the expression "the excise duty for the time being leviable on a like
article if produced or manufactured in India". The explanation to Section 3 has
two limbs. The
C.A.No.2411/02 .... (contd.)
- 10 -
first limb clarifies that the duty chargeable under sub-section (1) would be the
http://JUDIS.NIC.IN SUPREME COURT OF INDIA Page 5 of 5
excise duty for the time being leviable on a like article if produced or
manufactured in India. The condition precedent for levy of additional duty
thus contemplated by the explanation is that the article is produced or
manufactured in India. The second limb to the explanation deals with a
situation where "a like article is not so produced or manufactured". The use of
the word "so" implies that the production or manufacture referred to in the
second limb is relatable to the use of that expression in the first limb which is of
a like article being produced of (sic) manufactured in India.
11. The words "if produced or manufactured in India" does not mean that the
like article should be actually produced or manufactured in India. As per the
explanation if an imported article is one which has been manufactured or
produced then it must be presumed, for the purpose of Section 3(1), that such
article can likewise be manufactured or produced in India. For the purpose of
attracting additional duty under Section 3 on the import of a manufactured or
produced article the actual manufacture or production of a like article in India
is not necessary. As observed by this Court in Thermax Private Limited v.
Collector of Customs, Bombay [1992(61) E.L.T. 352 (S.C.) = [1992] 4 SCC 440]
at page 452-453 that Section 3(1) of the Customs Tariff Act "specifically
mandates that the CVD will be equal to the excise duty for the time being
leviable on a like article if produced or manufactured in India. In other words,
we have to forget that the goods are imported, imagine that the importer had
manufactured the goods in India and determine the amount of excise duty that
he would have been called upon to pay in that event." To our mind the genesis
of Section 3(1) of Customs Tariff Act has been brought out in the aforesaid
observations of this Court, namely, for the purpose of saying what amount, if
any, of additional duty is leviable under Section 3(1) of the Customs Tariff Act,
it has to be imagined that the articles imported had been manufactured or
produced in India and then to see what amount of excise duty was leviable
thereon."
18. For the reasons stated above, we accept these appeals,
C.A.No.2411/02 .... (contd.)
- 11 -
set aside the order of the Tribunal as well as that of the authorities below and it is held
that the appellants would be entitled to the benefit of the exemption notification no.8/96-
CE dated 23th July 1996 and consequently to the refund of the duty already paid in
accordance with law.
No costs.